Product Name :
COMBI IC Reagent: Mouse anti Myeloperoxidase-C2 (FITC) and Mouse anti CD22 (PE)
Description :
| Clone 8E6 and RFB4 | Isotype IgG1 | Product Type Primary Antibodies | Units 1 ml | Host Mouse | Species Reactivity Human | Application Flow Cytometry
Background :
Source :
Myeloperoxidase (MPO) is a glycoprotein present in the azurophil (primary) granules of myeloid cells, which appears in the myeloblast stage of myeloid cell differentiation. MPO is he most common functional protein of myeloid cells and is involved in the inflammatory response. It helps to kill microbes by breaking down peroxide in the presence of halide ions, contributing to the bactericidal function of granulocytes. The primary translation product of MPO undergoes glycosylation with production of the 89 kDa heme-free apopro-MPO form followed by incorporation of heme and conversion into the enzymatically active pro-MPO form. Subsequently, pro-MPO becomes targeted to azurophil granules where final processing occurs to produce mature dimeric MPO consisting of the 59-64 kDa MPO ?-chain and the 14 kDa MPO ?-chain. Precursor B-cells are surface-CD22 negative, but cytoplasmic CD22 positive. Mature B-lymphocytes.express CD22 also on their surface. The combined staining for MPO and CD22 allows the distinction of mature/immature myeloid cells and B-lymphocytes. The MPO-C2/CD22 COMBI-IC mAb permits the identification and enumeration of normal and malignant myelomonocytic cells and B lymphoid commited cells in human blood and bone marrow using flow cytometry. Results must be put within the context of other diagnostic tests as well as the clinical history of the patient by a certified professional before final interpretation. Analyses performed with this antibody should be paralleled by positive and negative controls. If unexpected results are obtained which cannot be attributed to differences in laboratory procedures, please contact us. <
Product :
1ml of FITC-conjugated anti Myeloperoxidase-C2 (clone 8E6) and PE-conjugated anti CD22 (cloneRFB4) in PBS pH 7.2, 1% BSA, and 0.05% NaN3, approximately 50 tests. Product Form: FITC and PE Formulation: PBS pH 7.2, 1 mg/ml BSA, 0.1% NaN3
Specificity :
Antibody MPO-C2 (clone 8E2) reacts with human myeloperoxidase (MPO) expressed by normal and malignant myelomonocytic cells. The CD22 mAb (clone RFB4) recognizes cytoplasmatic CD22 in precursor B-cells and surface as well cytoplasmatic CD22 on mature B-cells. In this COMBI-IC Reagent antibody 8E6 is conjugated to FITC, antibody RFB4 is conjugated to Phycoeythrin (PE). The sensitivity of MPO-C2/CD22 mAb is determined by staining well-defined blood samples from representative donors with serial-fold mAb dilutions to obtain a titration curve that allows relating the mAb concentration to the percentage of stained cells and geometric MFI (mean fluorescence intensity). For this purpose, a mAb-concentration range is selected to include both the saturation point (i.e. the mAb dilution expected to bind all epitopes on the target cell) and the detection threshold (i.e. the mAb dilution expected to represent the least amount of mAb needed to detect an identical percentage of cells). In practice, 50 µl of leukocytes containing 10^7 cells/ml are stained with 20µl mAb of various dilutions to obtain a titration curve and to identify the saturation point and detection threshold. The final concentration of the product is then adjusted to be at least 3-fold above the detection threshold. In addition and to control lot-to-lot variation, the given lot is compared and adjusted to fluorescence standards with defined intensity.
Applications :
Permeabilization and Staining Procedure – In combination with our Permeabilization Kit FIX&PERM? (Cat. No. GAS-002) intracellular MPO-C2 and CD22 can be easily stained in cell suspensions. – For each sample to be analyzed add 50 µl of whole blood, bone marrow or mononuclear cell suspension in a 5ml tube – Add 100 µl of Reagent A (Fixation Medium, stored and used at room temperature) – Incubate for 15 minutes at room temperature – Add 5ml phosphate buffered saline and centrifuge cells for 5 minutes at 300 g – Remove supernatant and add to cell pellet 100 µl Reagent B (Permeabilization Medium) and 20 µl of the MPO-C2/CD22 COMBI-IC monoclonal antibody conjugate – Vortex at low speed for 1-2 seconds – Incubate for 15 minutes at room temperature – Wash cells with phosphate buffered saline as described above – Remove supernatant and resuspend cells in sheath fluid for immediate analysis or resuspend cells in 0.5 ml 1.0 % formaldehyde and store them at 2-8°C in the dark. Analyze fixed cells within 24 hours.
Storage :
Nordic-MUbio monoclonal antibody reagents contain optimal concentrations of affinity-purified antibody. For stability reasons this monoclonal antibody solution contains sodium azide. These reagents should be stored at 2-8°C (DO NOT FREEZE!) and protected from prolonged exposure to light. If a slight precipitation occurs upon storage, this should be removed by centrifugation. It will not affect the performance or the concentration of the product. Stability of the reagent: Please refer to the expiry date printed onto the vial. The use of the reagent after the expiration date is not recommended.
Caution :
When used for in vitro diagnostic purposes results must be put within the context of other diagnostic tests as well as the clinical history of the patient by a certified professional before final interpretation. Analyses performed with this antibody should be paralleled by positive and negative controls. If unexpected results are obtained which cannot be attributed to differences in laboratory procedures, please contact us. This product may contain hazardous ingredients. Please refer to the Safety Data Sheets (SDS) for additional information and proper handling procedures. Dispose product remainders according to local regulations.This datasheet is as accurate as reasonably achievable, but our company accepts no liability for any inaccuracies or omissions in this information.
References :
1. Andersson, E., Hellman, L., Gullberg, U. & Olsson, I. (1998) J Biol Chem 273, 4747-53. 2. Beverley, P. C., Linch, D. & Callard, R. E. (1981) Haematol Blood Transfus 26, 309-13. 3. Boue, D. R. & Lebien, T. W. (1988) J Immunol 140, 192-9. 4. Braylan, R. C., Orfao, A., Borowitz, M. J. & Davis, B. H. (2001) Cytometry 46, 23-7 5. Catovsky, D., Matutes, E., Buccheri, V., Shetty, V., Hanslip, J., Yoshida, N. & Morilla, R. (1991) Ann Hematol 62, 16-21. 6. Janossy, G., Coustan-Smith, E. & Campana, D. (1989) Leukemia 3, 170-81. 7. Knapp, W., Majdic, O. & Strobl, H. (1993) Recent Results Cancer Res 131, 31-40. 8. Koeffler, H. P., Ranyard, J. & Pertcheck, M. (1985) Blood 65, 484-91. 9. Konikova, E., Glasova, M., Kusenda, J. & Babusikova, O. (1998) Neoplasma 45, 282-91. 10. Lanza, F., Latorraca, A., Moretti, S., Castagnari, B., Ferrari, L. & Castoldi, G. (1997) Cytometry 30, 134-44. 11. Li, J. L., Shen, G. L., Ghetie, M. A., May, R. D., Till, M., Ghetie, V., Uhr, J. W., Janossy, G., Thorpe, P. E., Amlot, P. & et al. (1989) Cell Immunol 118, 85-99. 12. Mason, D. Y., Stein, H., Gerdes, J., Pulford, K. A., Ralfkiaer, E., Falini, B., Erber, W. N., Micklem, K. & Gatter, K. C. (1987) Blood 69, 836-40. 13. Murao, S., Stevens, F. J., Ito, A. & Huberman, E. (1988) Proc Natl Acad Sci U S A 85, 1232-6.
Related websites: https://www.medchemexpress.com/antibodies.html
Popular product recommendations:
Ficlatuzumab
Ansuvimab
RICTOR Antibody: RICTOR Antibody is a non-conjugated and Rabbit origined monoclonal antibody about 192 kDa, targeting to RICTOR. It can be used for WB,IHC-P,ICC,FC assays with tag free, in the background of Human, Mouse.